As an Amazon Associate I earn from qualifying purchases.

Bosch gts1031 vs Dewalt dw745 Review

There has long been an ongoing debate about which brand is better. There are a lot of people professionals and hobbyists alike who feel that the miter saws made by Bosch are the best while there are also others who feel that Dewalt miter saws are better than Bosch miter saws. People usually feel so strongly about their beliefs but what remains certain is that people are always looking for miter saws that are durable, precise and accurate. This article will compare both tools and hopefully, people who are reading this will be able to pick which one they think is the best for them.
Bosch gts1031 vs Dewalt dw745

Bosch gts1031 10 inch Portable Jobsite Table Saw

The Bosch gts1031 10 inch portable jobsite table saw is known to have the square lock rip fence. Its main goal is to make sure that the saw will cut accurately each time it is used. Using my fingers, I was able to lock the blade into place with a use of a lever. This product is also very easy to store and bring to different places. I have tried to bring it one handed and it worked.

Advantages of the Bosch GTS 1031 10 inch Portable Jobsite Table Saw

  • It is capable of 18 inch material rips. The ripping is so powerful that even if ripping through some thick material, the saw never bogged down. It just continued ripping and it made working faster and easier.
  • The base form of this product is well made. It is made out of steel but it is still lightweight. Like mentioned earlier, it can be easy to bring around from one place to another. This makes setting up this equipment a breeze. It can also be stored on its side which is a no-no for other jobsite table saws. Its ability to be stored on its side makes it easy to bring when travelling.
  • The storage of the tools needed to make this power saw work has storage so it will be easy to place each time. People do not have to worry that they will lose some tools along the way.

Disadvantage of the Bosch GTS1031 10 inch Portable Jobsite Table Saw

  • The main advantage of this product is the fact that I had to constantly check if the lock was still in place. I know that the square lock rip fence is supposed to make sure that the saw will be accurate but it is not as accurate as I would like. It would sometimes be out of alignment after I have used it for quite some time.

 Dewalt DW745 10 inch Compact Job Site Table Saw

Dewalt DW745 makes use of the rack and pinion face rails which is actually very helpful since it makes adjustments very easy to do. Unlike the Bosch however, it can only make up to 16 inch material rips but it is superior when it comes to making fine adjustments.

  • While the Dewalt DW745 is much lighter than its competitor since it only weighs 45 pounds, it can be harder to store as compared to the Bosch. When the blade saw is placed on its built in cradle and a little movement happens, the blade easily falls off.
  • The SquareLock Rip Fence may be offered by Bosch but Dewalt has a better option for that with its rack and pinion face rails. With Dewalt DW745, people can be sure that the cutting will remain precise and accurate all throughout.
  • One of the main reasons why using the Dewalt DW745 can prove to be more accurate is because it can be installed with a light system that will allow that will allow more precise cutting to take place since the light can just be followed.

In conclusion, the two portable jobsite table saws are actually both strong and they also have some strong and weak points. It all amounts to people’s preference. There are some that will think that storage is always a plus while others are more concerned about the power of the saws that they are going to use.

 

Click here to purchase Bosch GTS1031 on Amazon!

 

Click here to purchase DEWALT DW745 on Amazon!

 

 

 

 

Reply