As an Amazon Associate I earn from qualifying purchases.

Festool TS 55 vs Makita sp6000 Review

People are always searching for saws that they can use for a long period of time. Most of the time, there are some saws that they purchase because of the price but after a few times of using those items, those items tend to break down. Choosing the right saw would have to be dependent on the features that are being offered as well as how long it would last even if the item would need to be used often and for long hours. People usually compare Festool TS55 and Makita sp6000 to see which one they should purchase. The main goal of this article is to give proper information and facts to help people know which one they should get.

Festool TS 55 vs Makita sp6000

Festool TS 5 REQ Circular Saw

For those who are searching for circular saws that will last for a long period of time, the Festool TS55 REQ may offer just that. The design of this circular saw is very modern which can appeal to a lot of people. It is also known to have various features that wood workers would need. This may be the perfect circular saw to use depending on the things the projects that should be done.

Advantages of Festool TS 5 REQ Circular Saw

  • This product comes with a guide rail. For those who do not know what this is, this is the feature which will make it possible for duplicate cuts to be made in another material from the previous material. This will make it easier for people to work since they will be cutting duplicate pieces and they do not have to waste their materials on trying to estimate the cuts to be made again and again.
  • The Festool TS 55 also comes with a splinter guard. For those who are not familiar with this, this will make sure that the cuts will remain clean. No splintering will appear on either side of the wood that has just been cut.
  • The rotating dust port is another feature that makes this product worth it because it can keep the work area spotless and clean. It will also avoid dust particles from going to the eyes because this can be a big problem in the long run.

Disadvantage of the Festool TS 5 REQ Circular Saw

  • One problem about this is that for people who do not have flat surfaces in order to place the circular saw, it will be hard for the saw to work well. This might mean that people should purchase a separate item to ensure that the circular saw will work its best.

Makita SP6000 1-2 Inch Plunge Circular Saw

  • This cannot be used as a replacement for the conventional circular saws. This means that while it can be used to do some small projects, it will be particularly hard to use this for a long period of time since it tends to get burned out from time to time. The Festool TS55 may perform better on this aspect.
  • The saw of the Makita is very good and it only needs to be adjusted once and it will not fall out of alignment unless the angles and the alignment would have to be changed yet again. Usually, the Makita may be better used for thin materials while the Festool can be used even for harder wooden materials.
  • There are times when the items that are sent to those who have ordered online are damaged or are not working properly. This is the reason why the Makita is better bought in person. There are no complaints about Festool though which means that it might be better in terms of this aspect.

Here are just some of the things that would help people choose the right saw to purchase.  People choose the saw that will work best for them and what they do. Consider the disadvantages and advantages well to make the right decision.

 

Click here to purchase Festool Festool TS 55 on Amazon!

 

Click here to purchase Makita SP6000 on Amazon!

 

 

 

 

 

Reply