As an Amazon Associate I earn from qualifying purchases.

DEWALT DWE7491RS vs DW744XRS – Let It Rip

DEWALT has a reputation for durable tools. It makes sense to select one of their table saws when there’s a project that demands some serious ripping. But which of these 10-inch saws will do the job right for you? Let’s compare them.

DEWALT DW744XRS

DEWALT DW744XRS

DEWALT DWE7491RS

DEWALT DWE7491RS

 

 

 

 

 

 

 

 

DW744XRS 10”Job Site Table Saw with Rolling Stand

Did the part about the rolling stand catch your eye? This is a portable saw so your workshop comes with you. It weighs 58 pounds, but its legs fold up and it rolls like a dolly. One person can move it alone. With the cantilevered legs extended the tabletop is 30 inches high. The workspace measures 26-1/2 by 19-1/4 inches.

The telescoping fence moves so there’s room to rip boards to a width of 24-1/2 inches. The fence rails are rack and pinion for exact adjustments. The 15-amp motor idles at 3650 rpm and ramps up speed to handle hardwoods with ease.

To keep the work area clean there’s a two-inch dust collection port that fits a shop vac hose. The accessories, including the power cord, store neatly inside the table when the work is done.

The main complaint voiced by users of this saw is that the included miter gauge is cheap and inaccurate.

The saw is covered by the usual DEWALT 90-day money back guarantee, 1 year service contract, and 3 year limited warranty. It comes with one 10-inch twenty-four tooth carbide blade, a push stick, and the aforementioned miter gauge.

Features of the DW744XRS:

    • portability with the rolling stand and foldable legs
    • cantilevered legs for stability and 30-inch-tall tabletop
    • 10”blade interchangeable with other DEWALT saws
    • guarding components can be added and removed without using tools
    • rack and pinion telescoping fence rails for accurate measurements
    • onboard storage of accessories
    • 15-amp motor, 3650 rpm at no load
    • cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees

DWE7491RS 10”Job Site Table Saw with 32-1/2”Rip Capacity and Rolling Stand

This is the recently improved version of the DW744XRS. It can rip wider boards and has new safety features. It also folds up and rolls like a dolly, which is handy since it weighs 90 pounds, quite a lot more than the other saw.

The telescoping rack and pinion fence rails allow for 32-1/2 inch cuts on the right side of the blade. The cut depth is the same as the DW744XRS. The tabletop workspace measures 26-1/4 by 22 inches.

The 15-amp motor idles at 4800 rpm. A new safety feature kicks in if the power is cut off unexpectedly. The saw stays powered down when the electricity comes back until the user restarts the saw.

The blade guard and riving knife don’t require tools for mounting or removal. The blade guard can stay in place even for narrow rips because the ripping fence flips. The guard has a place to mount a shop vac hose and the table does too.

The whole saw breaks down into a 27-1/2 x 46 x 25-inch package with all the accessories stored onboard.

Again the biggest complaint is the miter gauge. The other accessories included are a 24 tooth 10-inch carbide blade (interchangeable with other saws) and the push stick.

DEWALT stands behind this saw with a 90-day money back guarantee, 1 year service contract, and 3 year limited warranty.

Features of the DWE7491RS:

    • 32-1/2-inch-wide ripping capability
    • new power off reset safety feature
    • blade guard can stay in place for narrow rips with the flip over fence
    • tool-free mounting and removal of the blade guard
    • riving knife levers down inside the table when not needed
    • 90 pounds but portable by one person with the rolling stand
    • cantilevered legs for stability
    • 10”blade interchangeable with other DEWALT saws
    • rack and pinion telescoping fence rails for accurate measurements
    • onboard storage of accessories
    • 15-amp motor, 4800 rpm at no load
    • cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees

 

Recommendation

Are you doing a job where you need 32-1/2 inch rips? Perhaps a little more power to cut quickly through pressed hardwoods? Is safety number one at your job site? Consider the DWE7491RS if you don’t mind the heavier weight.

If a 24-1/2-inch rip is big enough to cover what you want to do, consider the DW744XRS. Its lighter weight is easier to heft when folding up the legs for transport.

 

Click here to purchase DEWALT DW744XRS on Amazon!

 

Click here to purchase DEWALT DWE7491RS on Amazon!

 

 

 

 

Reply